Hello again! Today we will continue our series yet again. This post will answer a basic question that many people have inquired about in the past…
Which bits will fit my Dremel® tool?
Every diamond bit on our website with a 1/16", 3/32" or 1/8" shank will fit Dremel® rotary tools. You will need to make sure that your Dremel® tool has an adjustable chuck or that you have the right size collet to fit your drill bit.
If you have an adjustable chuck simply tighten or loosen the chuck until the shank of the bit slides into the chuck. Then, tighten the chuck until it holds the bit securely in place.
If you don’t have an adjustable chuck, then your Dremel tool uses collets. The collet is the metal tube that holds the bit in your Dremel® tool. These are interchangeable. Even Dremel® brand bits come in different 2 different shank sizes, 1/8" and 3/32". Just change the collet to fit the bit you are using.
If you have an adjustable chuck simply tighten or loosen the chuck until the shank of the bit slides into the chuck. Then, tighten the chuck until it holds the bit securely in place.
If you don’t have an adjustable chuck, then your Dremel tool uses collets. The collet is the metal tube that holds the bit in your Dremel® tool. These are interchangeable. Even Dremel® brand bits come in different 2 different shank sizes, 1/8" and 3/32". Just change the collet to fit the bit you are using.
Please feel free to ask us any questions you may have regarding any of the products on our website, www.diamondburs.net.
No comments:
Post a Comment